Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Printek
  4. Mt3-II
  5. Benutzerhandbuch

Printek Mt3-II Benutzerhandbuch

Download
Seite von 34
Configuration and Data Connectivity 
12 
Switch Position(s) 
Function 
SW1 IrDA 
Interface 
OFF Disabled 
ON Enabled 
SW2 RS-232C 
Interface 
OFF Enabled 
ON Disabled 
SW3 Bluetooth/Wi-Fi 
Interface 
OFF Disabled 
ON Enabled 
SW4 SW5 
Baud 
Rate 
OFF OFF 
38,400 
OFF ON 
19,200 
ON OFF 
9,600 
ON ON 
2,400 
SW6 SW7 
Parity 
OFF X 
No 
Parity 
ON OFF 
Even 
Parity 
ON ON 
Odd 
Parity 
SW8 Reserved 
Mt3-II Configuration Switch Assignments 
 
Note:  Be careful when changing switch settings.  Carefully use a pointer on the lever of the switch you wish to 
change.  DO NOT use a lead pencil as this may contaminate the switch.  DO NOT use a screw driver or 
apply excessive force. 
 
 
 
Serial RS232C Communication 
The RS232C Interface signals for the Mt3-II Series printer are terminated on a 6 PIN RJ type data connector 
located on the side of the printer. 
Six connections are provided from the Serial Interface to the host computer.  The table below lists the Serial 
Interface signals and pin outs on the RJ connector.  A drawing showing the connector pin locations is also 
provided. 
The configuration switches SW1, SW2, and SW3 should all be set to OFF.  Also the settings for the Baud Rate, 
and Parity (SW4-7) must be set to match the host device settings.   
 
Required Switch Settings 
SW1 OFF 
SW2 OFF 
SW3 OFF 
SW4 Match 
Host 
SW5 Match 
Host 
SW6 Match 
Host 
SW7 Match 
Host