Lexmark C772 Benutzerhandbuch

MarkNet™ N8000 Series internal print servers (also called internal network adapters or INAs)

Note: Some options may not be available on some models.

Your printer supports one optional 2000-sheet drawer.

If you have an optional duplex unit and a 2000-sheet drawer, you must install a 500-sheet drawer 
between the duplex unit and the 2000-sheet drawer.

Unpack the 2000-sheet drawer and remove any packing material.

Place the drawer in the location you have chosen for your printer.

If you are installing a 500-sheet drawer on top of the 2000-sheet drawer, attach the stabilizing bars.

Place the two stabilizing bars on the ground, narrow side up.

Lower the 2000-sheet drawer onto the bars, making sure you align the holes in the drawer with the holes in 
the bars.

Screw the bars into place using four screws (two screws for each bar).

Adjust the four leveling feet on the bottom of the drawer, if necessary.

Note: You will install the power cord for the 2000-sheet drawer later.

Continue with Installing a 500-sheet drawer.

Leveling feet