Lexmark 3455 Benutzerhandbuch
85
7.2.1 Selecting the MarkNet Internal Print Server TCP/IP
Protocol Settings
Protocol Settings
From the printer operator panel, do the following:
1.
Press Menu> until the NETWORK MENU displays. Press Select.
2.
Press Menu> until the NETWORK OPTION 1 displays. Press Select.
(This example assumes the MarkNet internal print server is installed in
option connector 1.)
(This example assumes the MarkNet internal print server is installed in
option connector 1.)
3.
Press Menu> until you see NETWORK 1 SETUP. Press Select.
4.
Press Menu> until you see TCP/IP. Press Select.
Here you find the following settings:
Activate
Yes
Enable BOOTP
Yes
or
No
(Yes, if you use a BOOTP server.)
(No, if you set the IP address another way.)
(No, if you set the IP address another way.)
Enable DHCP
Yes
or
No
(Yes, if you use a DHCP server.)
(No, if you set the IP address another way.)
(No, if you set the IP address another way.)
Enable RARP
Yes
or
No
(Yes, if you use a RARP server.)
(No, if you set the IP address another way.)
(No, if you set the IP address another way.)
Set IP Address
157.184.67.102
(Address available from your network administrator)
Set IP Netmask
255.255.255.0
(Appropriate netmask for your network)
Set IP Gateway
157.184.67.1
(IP address of the IP gateway)
Set Hostname
Name
(Necessary when using DHCP server.)