Kodak 8670 Benutzerhandbuch

 

Installing the Hardware

 

2-2

Part No. 6B4389June 1999Au-

 

You need the following to install the NIC: 

• Network cabling certified for 10 and 100 MB operation. The NIC 

supports 10BaseT and 100BaseT cabling. Use category 5 
unshielded twisted pair cabling for 100 MB operation.

• Phillips-head screwdriver

• If a BNC (10Base2) connection is required, purchase a BNC/

RJ45 transceiver or hub from your local dealer or distributor. 

• If a connection from a single computer to a printer is required, 

use a mini-hub and two network cables. 

NOTE:  You can use an Rx/Tx crossover cable as a direct 

connection to a single computer without a hub. However, 
an Rx/Tx crossover cable is a nonstandard cable that 
may not be available from a local dealer. If you use an 
Rx/Tx crossover cable, make sure that it is clearly labeled 
so it is not confused with standard network cables for use 
with network hubs or switches.

 

1. Turn off, and unplug the 8660 printer.