Kodak 8670 Benutzerhandbuch
Part No. 6B4389
June 1999
B-1
Appendix B Command Summary
Command line input applies to the use of the following NIC
configuration mechanisms:
configuration mechanisms:
•
XConfig
•
Telnet
•
Terminal on NIC Serial Port
When connecting to the NIC, you get a message such as
Console Connected or Remote Console Reserved when you are
connected. Press RETURN, type the password ACCESS when
you get the # prompt, and type anything in response to the Enter
Username prompt. Enter commands at the Local>prompt.
Console Connected or Remote Console Reserved when you are
connected. Press RETURN, type the password ACCESS when
you get the # prompt, and type anything in response to the Enter
Username prompt. Enter commands at the Local>prompt.
NOTE: The commands available are generally a subset of the
commands used on terminal servers. There is no
distinction between the SET and DEFINE commands or
between the CLEAR and PURGE commands. When you
type CTRL-D to exit the remote console, any of these
commands take effect, and the results are stored
permanently. It is not necessary to enter both a SET and a
DEFINE to execute a command and save the results.
distinction between the SET and DEFINE commands or
between the CLEAR and PURGE commands. When you
type CTRL-D to exit the remote console, any of these
commands take effect, and the results are stored
permanently. It is not necessary to enter both a SET and a
DEFINE to execute a command and save the results.
General Server Commands
CLear SERVErSTRing
stringnumber
Removes a string number. Refer to Appendix B for more
information.
information.
CLear FAtal
Deletes fatal error log
Deletes fatal error log
CLear POrt P1 JOB
clears current entry in the NIC’s internal queue
clears current entry in the NIC’s internal queue
EXIT/^D
Exits print server console
Exits print server console
HElp
Provides information on available commands
Provides information on available commands
INitialize