Sony VGN - Z Benutzerhandbuch
39
Using Your VAIO Computer
Using the Optical Disc Drive
Your computer is equipped with an optical disc drive.
To insert a disc
1
Turn on the computer.
2
Press the disc drive eject button (1) to open the drive.
The tray slides out.
The tray slides out.
✍
If the disc drive eject button does not work, try the substitute drive eject button on the optical disc drive.
If the power supply to the optical disc drive is disabled by the VAIO Power Management, it will take a while to eject the drive tray. Note that the substitute
drive eject button is disabled when the optical disc drive is not powered.
When recovering your system, turn on your computer and press the substitute drive eject button on the optical disc drive. Insert your recovery disc
into the optical disc drive, turn off the computer, and then turn on the computer again to start the recovery process.
into the optical disc drive, turn off the computer, and then turn on the computer again to start the recovery process.
3
Place a disc in the middle of the tray with the label side facing upward and gently push it down until the disc clicks into
place.
place.