Sony XAV-C1 Betriebsanweisung

 

This section describes how to solve common problems you may 
encounter when using your computer. 

My computer won’t start
❑

Check that the computer is plugged into a power source and that it is 
turned on. Check that the power indicator on the front panel of the 
computer indicates that the power is on.

❑

Check that the battery is inserted properly and that it is charged.

❑

Make sure there is no diskette in the floppy disk drive.

❑

Confirm that the AC adapter and all cables are connected firmly, as 
described in “Connecting Peripheral Devices” on page 33.

❑

If you plugged the computer into a power strip or UPS, make sure the 
power strip or UPS is turned on and working.

❑

If you are using an external display, check that it is plugged into a 
power source and turned on. Check that the brightness control is 
adjusted correctly. See the manual that came with your display for 
details.

❑

Moisture condensation may have occurred. Do not use the computer 
for at least one hour and then turn on the computer.

When I turn on my computer, the message “Operating system not found” 
appears and Windows does not start
❑

Check the floppy disk drive to see if a non-bootable diskette is in the 
drive. 

❑

If a non-bootable diskette is in the drive, turn off the computer, 
remove the diskette, and then turn on the computer again. Confirm 
that Windows starts properly. If Windows still does not start, follow 
the procedure below to initialize the BIOS.

❑

If the floppy disk drive is empty or contains a bootable diskette, use 
the following procedure to initialize the BIOS:

✍

When you reconnect devices, be sure to turn off the computer as described in “Shutting 
Down Your C1 PictureBook Computer” on page 13. Turning off the computer using other 
methods may result in data loss.