MGE UPS Systems 3000 Benutzerhandbuch
Only for 3000
72Vdc, 9Ah
Pb
344-50297-00
TO BATTERY
RS232
CABINET
IN
SITE WIRING
FAULT
max for 3000XL
max for 3000
12 battery cabinets
WARNING
3 battery cabinets
OUT
Data line protection
Volt: 72Vdc 40A
BATTERY CONNECTOR
U.S. PAT. No. 6,094,363
Page 14 -
3400723100/AD
Only for 3000
72Vdc, 9Ah
Pb
344-50297-00
TO BATTERY
RS232
CABINET
IN
SITE WIRING
FAULT
max for 3000XL
max for 3000
12 battery cabinets
WARNING
3 battery cabinets
OUT
Data line protection
2. Installation
2.5 Connection to the RS232 or USB communications port (optional)
1 - Connect the RS232 26 or USB 27
communications cable to the serial port or
the USB port on the computer.
communications cable to the serial port or
the USB port on the computer.
2 - Connect the other end of the communi-
cations cable 26 or 27 to the RS232 2
or USB 1 communications port on the
UPS.
cations cable 26 or 27 to the RS232 2
or USB 1 communications port on the
UPS.
The UPS can now communicate with all
MGE UPS SYSTEMS supervision, set-up or
safety software.
MGE UPS SYSTEMS supervision, set-up or
safety software.
26
27
CAUTION: The RS232 and USB
communications ports cannot
operate simultaneously.
communications ports cannot
operate simultaneously.
2.6 Connection to the data-line protection port (optional)
The data-line protection function on the UPS
eliminates overvoltage flowing on the com-
puter-network lines.
Simply connect the line to be protected to
the UPS using the data-line protection con-
nectors (IN and OUT) as indicated opposite
(RJ45 cables not supplied).
eliminates overvoltage flowing on the com-
puter-network lines.
Simply connect the line to be protected to
the UPS using the data-line protection con-
nectors (IN and OUT) as indicated opposite
(RJ45 cables not supplied).
1
2