Anton/Bauer ProPac 13/14 Benutzerhandbuch
- 8 -
The Trimpac batteries have an internal resettable fuse. If a short is placed
on the battery, the fuse will automatically “open”. When the short is
removed, the battery will resume to normal operation.
If the battery continues to blow fuses, test the equipment being powered
for any short circuit at the D.C. power input.
If no short is found, contact the Anton/Bauer Customer Support
Department for assistance at 1-800-541-1667 or 203-925-4991 or fax 203-
929-9935.
on the battery, the fuse will automatically “open”. When the short is
removed, the battery will resume to normal operation.
If the battery continues to blow fuses, test the equipment being powered
for any short circuit at the D.C. power input.
If no short is found, contact the Anton/Bauer Customer Support
Department for assistance at 1-800-541-1667 or 203-925-4991 or fax 203-
929-9935.
CHARGE STATUS INDICATOR
This Logic Series battery has a manually selectable charge status indicator
located on the back of the battery (see Diagram A).
located on the back of the battery (see Diagram A).
To Use:
Manually slide the selector to the right (towards the center of
the battery back) to indicate a green or charged battery status.
the battery back) to indicate a green or charged battery status.
Or
Manually slide the selector to the left (towards the outside edge
of the battery back) to indicate a red or discharged battery status.
of the battery back) to indicate a red or discharged battery status.