Sony MCS-8M Benutzerhandbuch
I-22
Configuring Audio Signal Settings
Cha
p
te
r 2
P
repa
ra
ti
ons
Configuring the Mic/Line Levels for
Audio Inputs
Audio Inputs
Adjustment of mic/line levels is necessary when the peak
indicators light red, or when the input signal indicators do
not light while audio signal input exists.
indicators light red, or when the input signal indicators do
not light while audio signal input exists.
When the peak indicators light red
A channel fader’s peak indicator will light red if the audio
signal input is too loud. In this case, since the analog mic/
line level exceeds the input level of the currently selected
line, use the following procedure to adjust it.
signal input is too loud. In this case, since the analog mic/
line level exceeds the input level of the currently selected
line, use the following procedure to adjust it.
1
Press the SETUP button to display the [Setup] menu.
2
Turn the V1 knob to select [Audio], and press the
knob.
knob.
3
Turn the V1 knob to select the number of the MIC/
LINE IN connector ([MIC/LINE 1 Level] to [MIC/
LINE 6 Level]) for which you want to configure the
mic/line level, and turn the V4 knob to select the level.
LINE IN connector ([MIC/LINE 1 Level] to [MIC/
LINE 6 Level]) for which you want to configure the
mic/line level, and turn the V4 knob to select the level.
4
Repeat step 3 to configure the levels for the other MIC/
LINE IN connectors.
LINE IN connectors.
Setting example:
If a peak indicator lights at the default setting of
[–20 dB], select the [+4 dB] setting. (However, the
peak indicator may also light at the [+4 dB] setting in
some cases.)
If a peak indicator lights at the default setting of
[–20 dB], select the [+4 dB] setting. (However, the
peak indicator may also light at the [+4 dB] setting in
some cases.)
When the input signal indicators do not
light
light
When the input signal indicators do not light even when
audio signals are being input, the reference values for the
mic/line levels are not being met. In such cases, perform
the previous peak indicator procedure, and configure the
lower mic/line levels for the respective channels.
audio signals are being input, the reference values for the
mic/line levels are not being met. In such cases, perform
the previous peak indicator procedure, and configure the
lower mic/line levels for the respective channels.
Setting example:
If an input signal indicator does not light at the default
setting of [–20 dB], select the [–44 dB] setting.
If an input signal indicator does not light at the default
setting of [–20 dB], select the [–44 dB] setting.
Knob
Parameter Meaning
Setting values
V4
Level
Input level
–44 dB,
–
20 dB,
+4 dB
Peak
indicator
indicator
Input signal
indicator
indicator
0 0 0 1
R a t e
3 0
S S
M o n
PGM
Setup
3/11
S e l e c t
Startup Define
System
System
Audio
Video (Input)
Enter
0 0 0 1
R a t e
3 0
S S
M o n
PGM
Audio
7/20
S e l e c t
Level
-20dB
MIC/LINE 1 Level
MIC/LINE 2 Level
MIC/LINE 3 Level
MIC/LINE 4 Level
MIC/LINE 3 Level
MIC/LINE 4 Level