Sony 4-296-436-11 (2) Benutzerhandbuch
II-52
Assigning Video Input Signals to the Cross Point Buttons (Video (XPT))
Ch
apt
apt
er 8
S
e
tup ([
Set
u
p
] Men
u
)
Assigning Video Input
Signals to the Cross Point
Buttons (Video (XPT))
Signals to the Cross Point
Buttons (Video (XPT))
Assign video signals to the cross point buttons (PGM
buttons and PST/KEY buttons) in the items of the [Setup]
menu > [Video (XPT)] menu.
buttons and PST/KEY buttons) in the items of the [Setup]
menu > [Video (XPT)] menu.
For details on the setting procedure, see “Assigning Video Signals to the
Cross-Point Buttons” (
c Basic Operation).
In 3D mode, this menu is not displayed.
Using the Shift Button Function
By using the cross point button 8/SHIFT as the Shift
button, you can assign a total of 14 materials (seven to
cross buttons 1 to 7, and seven to cross buttons 1 to 7 +
Shift button (cross point button 8/SHIFT)).
button, you can assign a total of 14 materials (seven to
cross buttons 1 to 7, and seven to cross buttons 1 to 7 +
Shift button (cross point button 8/SHIFT)).
Settings menu: [XPT Shift Mode] (page II-52)
Numbers are assigned to the cross buttons as shown below
in accordance with whether or not the Shift button function
is on or off.
in accordance with whether or not the Shift button function
is on or off.
Shift button function: Off (non-shift mode)
Shift button function: On (shift mode)
The following table shows the factory default settings for
assignments.
assignments.
Details on [Video (XPT)] Menu
Tip
PGM/PST Cross
Point Button
Point Button
Initial Value
1 to 4
SDI IN 1 to 4 (SDI1 to SDI4)
5
DVI-I (DVI)
6 to 8
HDMI IN 1 to 3 (H/V1 to H/V3) in HD
mode
VIDEO IN 1 to 3 (H/V1 to H/V3) in SD
mode
mode
VIDEO IN 1 to 3 (H/V1 to H/V3) in SD
mode
9
Color background (ColBg)
10
Frame memory (FM)
11
Program output (PGM)
12 to 14
Black signal (Black)
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14 Shift
Menu item Description
Knob Parameter Meaning
Setting range
XPT
Assign 1
Assign 1
to
XPT
Assign 14
Assign 14
Assign the video signals input from the video input
connectors and internally generated signals to cross
point buttons 1 to 14 (PGM buttons, PST/KEY
buttons).
connectors and internally generated signals to cross
point buttons 1 to 14 (PGM buttons, PST/KEY
buttons).
V4
Source
Video signals
Black, SDI1 to 4,
DVI, H/V1 to 3,
ColBg, FM, PGM
DVI, H/V1 to 3,
ColBg, FM, PGM
XPT Shift
Mode
Mode
Select whether to use cross point button 8 as a Shift
button.
Hold: The button operates as a shift button, and the
button.
Hold: The button operates as a shift button, and the
cross point buttons on the shift side are enabled
while the button is pressed.
while the button is pressed.
Lock: The button operates as a shift button, and
each press switches between the assignments
on the shift side and non-shift side.
on the shift side and non-shift side.
Off: The button operates as cross point button 8.
V4
Mode
Switches
between shift
and non-shift
between shift
and non-shift
Off, Hold, Lock