Belkin F1DH102L Benutzerhandbuch
12
Using the KVM Switch
To modify the hot-key preceding sequence from the default Scroll Lock, you can
either hit the hot-key sequence: scrlk – scrlk – H – (y), y = SCROLL LOCK, CAPS,
ESC, F12, LEFT_CTRL, RIGHT_CTRL, or NUM LOCK (as detailed in the Hot Key
Quick Reference Table below).
or
You can use another method: Press and hold the last button to enter the hot-key
setting mode.
Step 1. Press and hold the last button (i.e., the second button on the 2-port model
or the fourth button on the 4-port model) till you hear two beeps. Then
release the button.
Step 2. Within two seconds, you should hit any of the selectable hot-key triggers
(y), y = SCROLL LOCK, CAPS, ESC, F12, LEFT_CTRL, RIGHT_CTRL, or
NUM LOCK, to be your hot-key trigger.
For example, if you hit CAPS after hearing the two beeps, then the hot key will be:
CAPS – CAPS – command key.
For detailed hot-key sequences and their corresponding functional commands,
please refer to the Hot Key Quick Reference Table below.
please refer to the Hot Key Quick Reference Table below.
Hot Key Quick Reference Table
2-/4-Port SOHO KVM Switch with Audio & Mic -- Operation Commands for Hot Keys/Front-Panel Buttons
Hot-key sequence = [ScrLk] + [ScrLk] + Command key(s)
* user-definable preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK, LEFT_CTRL, RIGHT_CTRL
Command
Hot Keys
1
Front-Panel Buttons
Description
Select Computer Channel
2
(Joint-select PC port/audio &
mic, if binding is enabled)
ScrLk + ScrLk + (x)
(x is a top-row number key)
x = 1~2 / x = 1~4 for PC
channel no.
Press the computer icon on the
left of a button to select the
active computer channel
Select the active computer channel
(Hot key: Joint-select PC port/audio & mic, if binding is enabled)
Select Audio & Mic Channel
2
(Joint-select PC port and audio
& mic, if binding is enabled)
ScrLk + ScrLk + (Fy)
Fy = F5~F6/Fx=F5~F8 (Fy is a
function key)
--
Select the active audio & mic channel
(Hot key: Joint-select PC and audio & mic channel, if binding
is enabled)
Bind Computer and
Audio & Mic Switching
2
[Default]
ScrLk + ScrLk + Q
--
Enable the binding of PC port and audio & mic switching. (Hot
key: Once this feature is enabled, any computer and/or audio &
mic switching by hot keys is bound together) (factory default)
Unbind PC and
Audio & Mic Switching
2
ScrLk + ScrLk + W
--
Disable the binding of PC port and audio
& mic switching
Next lower PC channel
2
(Joint-select PC/audio & mic,
if binding is enabled)
ScrLk + ScrLk + (arrow up)
--
Select the next lower connected PC channel
(Hot key: Joint-select PC/audio & mic, if binding is enabled)
Next higher PC channel
2
(Joint-select PC/audio & mic,
if binding is enabled)
ScrLk + ScrLk +
(arrow down)
--
Select the next higher connected PC channel
(Hot key: Joint-select PC/audio & mic, if binding is enabled)
Previous PC channel
ScrLk + ScrLk + Backspace
--
Toggle between the previous channel and
current channel
Define Hot-Key
Preceding Sequence
ScrLk + ScrLk + H + (y)
y = SCROLL LOCK, CAPS, ESC,
F12, NUM LOCK, LEFT_CTRL,
or RIGHT_CTRL
Press and hold down last button
(Button 2 / Button 4) until you
hear three beeps, release the
button, and then press (y) key.
This resets hot-key preceding
sequence to SCROLL LOCK.
Select the hot-key preceding sequence among 6 alternative keys
Read KVM
Firmware Version
Open Note Pad
ScrLk + ScrLk + V
--
Read the version of firmware that is currently on the KVM
Switch. This is helpful when a firmware upgrade is performed as
it gives you the ability to read the version of firmware, before and
after the upgrade, to ensure the firmware has installed correctly.
Notes:
1. The USB keyboard hot keys allow faster and broader control of your KVM Switch and audio/mic switching
in addition to the front-panel buttons.
If you have configured a hot-key preceding sequence other than
two consecutive scroll locks, you should change your hot-key sequence accordingly. (For hot-key
preceding sequence configuration, please refer to the Hot Key Quick Reference Table.)
2. When the binding of PC and audio and mic switching is enabled by the hot-key sequence: ScrLk + ScrLk
+ Q, any PC and audio and mic switching by hot keys are bound together.
(However, the binding will not
affect the independent front-panel button operation.) To remove this binding, use the hot-key sequence:
ScrLk + ScrLk + W.
Mac
®
User: Standard PC keyboard mapping to MAC keyboard -- ScrLk + ScrLk + C = (CD/DVD drive
eject key); ScrLk + ScrLk + F10 = F13 ; ScrLk + ScrLk + F11 = F14 ; ScrLk + ScrLk + F12 = F15.
LED Information:
Computer LED status (3 states: Lit/Flashing/Off). Lit = Active port with link established between KVM Switch
and computer (via USB interface); Flashing = Active port but with no link established between KVM Switch and
computer; Off = Non-active port.
Audio LED status (2 states: Lit/Off). Lit = Active port for audio output; Off = Non-active port for audio output.
Audio LED status (2 states: Lit/Off). Lit = Active port for audio output; Off = Non-active port for audio output.