Cable Electronics SW404HD Benutzerhandbuch

Example:   Close the output ports 03, 05, and 06. 

Step 1: 

First press down the output number keys 03, 05 and 06 to the right 

Step 2: 

Press the Disconnect key 

Step 3:  Press the previously pressed output number keys 03, 05 and 06 (or press the 

Deselect all output key) to complete the operation. The final results will be as shown 
below: 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1) Select all output function is used to select one port for input and all output ports for output. 

A specific example of operation is described below: 

Example:  Using a SW808HD matrix with all input and output ports properly connected to the 

equipment. The needed input/output ports should be set to audio/video channel 1 while switching 

all output ports to output. 

Make sure to select both Video and Audio by checking the boxes in the lower right corner 

of the blue box. Then, press the Select all output key and select the input number key 

01. Click on the matrix icons along the 01 row 

 to turn them into 

 to 

complete the command operation. 

. (2)  DeSelect all output function is used to close the Select all output functions.