Toshiba Satellite R10 Benutzerhandbuch
3 Tests and Diagnostics
3.3 Setting of the hardware configuration
Satellite R10 Maintenance Manual (960-509)
3-11
Setting of the HWSC
Setting of the UUID
Display of the DMI information (including UUID)
Setting of DVD region code (Yes/No)
Setting of the UUID
Display of the DMI information (including UUID)
Setting of DVD region code (Yes/No)
After completion of the above settings, H/W configuration & DMI information are
appeared in order. Check the contents and press Enter.
appeared in order. Check the contents and press Enter.
Following message appears in the display. Press any key, then return to the H/W
initial information setting tool menu.
initial information setting tool menu.
+------------------------------------------------+
+ It switches off the power on automatically. +
+------------------------------------------------+
Press any key to continue...
Subtest 02
Region write
This subtest executes the setting of the region code for DVD drive based on the
destination of the machine.
destination of the machine.
When the region code is already written, test ends without setting.
The following message appears in the display after setting the region code. Press
any key to return to the H/W initial information setting tool menu.
any key to return to the H/W initial information setting tool menu.
***********************************
******* It completed *******
***********************************
*
*
Press any key to continue...
Subtest 03
DMI information save
NOTE: Before replacing the system board, be sure to execute this subtest and save the
DMI information to the floppy disk.
DMI information to the floppy disk.
This is one of tools to copy the DMI information to a new PCB after replacing.
This subtest saves all the DMI data in a floppy disk.