Sony Micro Hi-Fi System with Giga Juke Hard Drive NAS-50HDE Benutzerhandbuch

NAS-50HDE.GB.2-890-157-11(1)

 During recording, a track mark is added whenever 

you press the HDD REC  button. Track marks 

can only be added for tracks with a minimum 

length of 16 seconds.

 When “Auto title” is set to “Off”, the recording date 

and time will be recorded.

You can import audio files stored on a USB 

storage device to the HDD Jukebox.

Enter the Function menu and select 

[HDD JUKEBOX].

Connect the USB storage device to 

the USB connecting jack on the unit.
Refer to the operation manual of the 

storage device as well.

Enter the Option menu and select 

[Import] – [USB storage].

If the drive selection display appears, 

select the drive.
If the connected USB storage device 

has only one drive, the drive selection 

display does not appear.

Select the albums to be imported.
The selected albums are checked  .

You can remove a check mark by 

pressing ENTER again.

Select [Import].

 You can import a maximum of 10,000 tracks at a 

time (page 102).

 If two USB storage devices are connected to both 

jacks (rear and front) at the same time, the device 

connected to the front jack takes priority.

When the unit is connected to a network, 

you can import audio files from shared 

folders on your computer to the HDD 

Jukebox.

To do this, the folder must be specified as a 

shared folder in advance (page 94).

Enter the Function menu and select 

[HDD JUKEBOX].

Enter the Option menu and select 

[Import] – [PC shared folder].

Select the shared folder by 

performing the procedures from 1 to 

3 described below.

Select one of the following items.

PC name

The computer name or 

an IP address (up to 15 

letters/numbers)

Share name The shared name that was 

entered when the folder 

was set to be shared (page 

94)

User name The user name that 

was used to access the 

computer when the folder 

was set to be shared

Password

This is needed only when 

a password was entered 

for the shared folder.

Enter the text string that corresponds 

with the item selected in step 1.
For details on entering text, see “Entering 

text” on page 16.

Select [Connect].