Franke Consumer Products FCR 908 TC Benutzerhandbuch
EN
8
8
USE
B
A
D
C
E
G
F
I
H
L
Control board
Key Function Display
A
Switches the extractor motor on and off at the latest
selected speed
selected speed
Indicates the selected speed.
B
Decreases the suction speed.
The number of lit LEDS decreases.
C
Increases the suction speed.
The number of lit LEDS increases.
D
By pressing this key it is possible to start the inten-
sive speed from any previously selected speed ex-
cept the Delay-function and 24H-function. This
speed has been timed at 10 minutes. After that time
the system activates automatically the latest selected
speed. This function is suitable for cooking condi-
tions when vapours and smells are at the utmost e-
mission.
sive speed from any previously selected speed ex-
cept the Delay-function and 24H-function. This
speed has been timed at 10 minutes. After that time
the system activates automatically the latest selected
speed. This function is suitable for cooking condi-
tions when vapours and smells are at the utmost e-
mission.
I flashes and the LEDS are all lit.
By pressing the key the function is
stopped.
By pressing the key the function is
stopped.
E
By pressing this key it is possible to set up the motor
to a suction speed at 100 m
to a suction speed at 100 m
3
/h .
24 appears and the LEDS extinguish one
by one.
By pressing the key the function is
stopped
by one.
By pressing the key the function is
stopped
F
By pressing this key it is possible to set the delayed
shutdown of the motor and the lighting to 30 min-
utes. This function is suitable for a complete elimi-
nation of residual cooking odours. Functioning only
when the motor is on(not during the 24H-function or
intensive function). By pressing the key the function
is stopped
shutdown of the motor and the lighting to 30 min-
utes. This function is suitable for a complete elimi-
nation of residual cooking odours. Functioning only
when the motor is on(not during the 24H-function or
intensive function). By pressing the key the function
is stopped
A flashing clock-symbol appears.
By pressing the key the function is
stopped
By pressing the key the function is
stopped
G
By pressing this key for about 2 seconds it is possi-
ble to reset the filter saturation alarm
ble to reset the filter saturation alarm
After 100 working hours a drop-symbol
appears. Metal grease filters have to be
washed.
After 200 working hours C appears.
Charcoal filters have to replaced.
appears. Metal grease filters have to be
washed.
After 200 working hours C appears.
Charcoal filters have to replaced.
H
By pressing this key the intensity of the lighting
system can be decreased.
system can be decreased.
I
Switches on/off the lighting system at the maximum
intensity.
intensity.
L
By pressing this key the intensity of the lighting
system can be increased.
system can be increased.
Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the glass. The
motor and lights are switched off.
By pressing the D-key (Intensive) for about 5 seconds the keyboard block can be activated or
deactivated. This function is confirmed by a Beep and by moving motor LEDS on display.
motor and lights are switched off.
By pressing the D-key (Intensive) for about 5 seconds the keyboard block can be activated or
deactivated. This function is confirmed by a Beep and by moving motor LEDS on display.