Eclipse - Fujitsu Ten CD3403 Benutzerhandbuch
65
Mounting instruction
Names of lead wires and destinations (refer to Page 67)
No.
Name
Wire color
Destination
1
ACC
Red
Connect where the power comes on
when the ignition is in the ACC
position.
when the ignition is in the ACC
position.
2
B+
Yellow
Connect where the power is
constantly available, regardless of the
ignition switch's position.
constantly available, regardless of the
ignition switch's position.
3
Ground
Black
Connect where good body
grounding is available.
grounding is available.
4
Antenna power supply Blue
Connect to the automatic-antenna
control terminal of the vehicle.
control terminal of the vehicle.
5
Lamp power supply
Orange/White
Connect to where power comes on
when the headlights are turned on.
when the headlights are turned on.
6
Control power supply
Blue/White
Connect to the control terminal for
the external amplifier, etc.
the external amplifier, etc.
7 & 8
Line-out terminals
Connect to the RCA input connectors
of an external amplifier.
of an external amplifier.
9
Speaker terminals
Connect them to their respective
speakaers.
speakaers.
10
Cellular phone mute
Pink
C o n n e c t t o t h e g r o u n d o u t p u t
terminal on a mobile phone.
O Note O
To prevent unconnected leads from shorting out, insulate them
by wrapping their tips with electrical tape. Similarly, insulate the
ends of connected leads.
If an external amplifier is to be connected to the receiver, be
sure to ground its outside housing to the vehicle body (a metal
part).
by wrapping their tips with electrical tape. Similarly, insulate the
ends of connected leads.
If an external amplifier is to be connected to the receiver, be
sure to ground its outside housing to the vehicle body (a metal
part).