Mitsubishi Electronics A0567659 Benutzerhandbuch

 

Gravimetric Batch Blenders w/Mitsubishi Control    Chapter 3: Installation 

45 

•  Clear Inventory 
•  Display Time & Date 

Batch Interval or Timed Interval Printout 
The Batch Interval item under the Recipe menu works in conjunction with the Auto Print 
Interval to set the number of batches between printouts or on a timed interval between 
printouts. 

When entering the Report Setup menu, the operator will have to decide whether the printout 
should be timed and by the number of batches between each printout. The operator will have 
to toggle between the “Recipe Format” and the “Report Setup” screens to configure the 
settings properly. 

If you want to print out on a time format, press the button next to the “Auto Print/Clear 
Interval” key. The screen will then prompt the operator to set the time interval in hours (1 to 
24). 

If you want to change the hours between printouts, press the “Auto Print/Clear Interval” key 
again to change the value to the desired time.  

The operator will then need to program in when they want to begin the timed printouts. 
Simply select the time (0-23, {midnight =0} on a 24-hour clock) and press the “Done” key to 
retain the current settings in the “Report Setup” screen. 

If you wish to print out the inventory information on a batch interval basis, then simply enter 
in the desired batch interval under the Recipe Format screen and the printouts will occur each 
time that the number of batches programmed is produced. To set the batch interval, press the 
bottom button “Weigh Every Batch”, “Weigh Every Other Batch,” etc. to change this setting, 
keep pressing this button until the desired option is reached.  Once you have chosen the 
number of batches that will be produced between printouts, press the “Done” key to return to 
the Setup screen.  If the “Auto Print Inventory” feature has been enabled in the “Report 
Setup” screen, then the printer will produce printouts according to the settings instructed 
above. 

Print Inventory 
The print inventory menu item is used to produce on demand, inventory printouts. Before 
selecting this item, be sure that the printer is properly connected and ready. This function will 
generate an inventory printout with the current date and time information. 

Display Time and Date 
The display Time and Date item in the upper right corner of the “Report Setup” menu is used 
to verify the current time and date information.