Beko TF546APS Benutzerhandbuch

EN

11

Final Check
Before you start using the refrigerator 
check that:

1. The feet have been adjusted for 
perfect levelling.
2. The interior is dry and air can 
circulate freely.
3. Clean the interior as recommended 
under "CLEANING AND CARE."
4. Insert the plug into the wall socket 
and switch on the electricity supply.
5. You will hear a noise as the 
compressor starts up. The liquid and 
gases sealed    within the refrigeration 
system may also give rise to noise, 
whether the    compressor is running 
or not which is quite normal.
6. We recommend that you set 
the thermostat at 3 (three) and 
monitor the temperature to ensure 
the appliance maintains desired 
storage temperatures (See section 
Temperature Control and Adjustment).
7. Do not load the appliance 
immediately it is switched on. Wait 
until the correct storage temperature 
has been reached. We recommend 
that you check the temperature 
with an accurate thermometer (see; 
Temperature Control and Adjustment).

Important Notes :

1.If there is a power failure do not open 
the door. Frozen food should not be
affected if the failure lasts for less than 
25 hours. If the failure is longer, then 
the food should be checked and either 
eaten immediately or cooked and then
re-frozen.
2.If you find the freezer door difficult 
to open just after you have closed it, 
don't worry. This is due to the pressure 
difference which will equalise and allow 
the door to open normally after a few 
moments.
3.You will hear a suction sound just 
after closing the door. This is quite 
normal.