Nokia E61i 24770 Benutzerhandbuch
Produktcode
24770
Advanced Internet access point settings for packet data (GPRS)
After setting up a basic Internet access point for packet data (GPRS), select
Options
>
Advanced settings
, and define the following
advanced settings.
•
•
Network type
— Select
IPv4
or
IPv6
as the Internet protocol type. The Internet protocol defines how data is transferred to
and from your device.
•
Phone IP address
— Enter the IP address of your device. Select
Automatic
to have the network provide the device IP address.
This setting is shown only if you select
Network type
>
IPv4
.
•
DNS address
— Enter the IP addresses of the
Primary DNS address
and
Secondary DNS addr.
if required by your service provider
or network operator. Otherwise, the name server addresses are provided automatically.
•
Proxy serv. address
— Enter the address of the proxy server. Proxy servers are intermediate servers between a browsing
service and its users, which are used by some service providers. These servers may provide additional security and speed up
access to the service.
Set up an Internet access point for wireless LAN
You can use the WLAN wizard to create Internet access points for wireless LAN, or define the access point manually.
Connection manager
Select
Menu
>
Connect.
>
Conn. mgr.
.
To view the status of data connections or end connections, select
Act. data conn.
.
To search for wireless LANs available within range, select
Availab. WLAN
.
View and end active connections
Note: The actual invoice for calls and services from your service provider may vary, depending on network features,
rounding off for billing, taxes, and so forth.
In the active connections view, you can see the open data connections: data calls, packet data connections, and wireless LAN
connections.
To view detailed information about network connections, select the connection from the list and
To view detailed information about network connections, select the connection from the list and
Options
>
Details
. The type
of information shown depends on the connection type.
To end a network connection, select the connection from the list and
To end a network connection, select the connection from the list and
Options
>
Disconnect
.
To end all active network connections simultaneously, select
Options
>
Disconnect all
.
To view the details of a network, press the scroll key.
Search for wireless LAN
To search for wireless LANs available within range, select
Menu
>
Connect.
>
Conn. mgr.
>
Availab. WLAN
. A list of found
networks is displayed.
The available wireless LAN view shows a list of wireless LANs within range, their network mode (infrastructure or ad-hoc), signal
The available wireless LAN view shows a list of wireless LANs within range, their network mode (infrastructure or ad-hoc), signal
strength indicator and network encryption indicators, and if your device has an active connection with the network.
To view the details of a network, press the scroll key.
To create an Internet access point in a network, select
To view the details of a network, press the scroll key.
To create an Internet access point in a network, select
Options
>
Define access point
.
C o n n e c t i v i t y
© 2007 Nokia. All rights reserved.
56