Philips 52PFL7762D Benutzerhandbuch

Two people are required to lift and 
carry a TV that weighs more than 25 
kilogrammes. Improper handling of the 
TV can cause serious injury.

If you place the TV set on a surface, 
ensure the surface is level and that it can 
withstand the weight of the TV.

Mounting the TV on the wall requires 
special skill that should only be 
performed by a qualified personnel. 
You should not attempt to do the work 
yourself. Philips bear no responsibility 
for improper mounting or mounting that 
results in accident or injury.

This TV is compatible with the VESA 
wall mounting standard. Please contact 
your local electronics retailer for a VESA 
compliant bracket to wall mount this TV. 
Before you mount your TV on a wall, 
ensure the wall is suitable to carry the 
weight of the TV.

Wherever you place or mount the 
TV, ensure that air can circulate freely 
through the ventilation slots. Do not 
place the TV in a confined space.

Do not place naked flame sources such 
as lighted candles close to the TV.

Do not expose the TV or the batteries 
of the remote control to heat, direct 
sunlight, rain, or water.

X

X

Do not place a vessels filled with water 
on top of or near to the TV.  Spilling 
water into the TV can result in electric 
shock. If you spill water into the TV, 
do not operate the TV.  Immediately 

1.

2.

3.

4.

5.

6.

7.

8.

disconnect the TV from the mains and 
have the TV checked by a qualified 
technician. 

Do not touch any part of the TV, power 
lead, or aerial lead during lightning 
storms.

Do not leave the TV in standby mode 
for an extended period of time. Instead, 
disconnect the TV from the mains.

The TV set is always connected to the 
mains. You can disconnect the TV from 
the mains by doing one of the following 
tasks: 
•  unplugging the mains cord located at  
 

the back of TV set

•  unplugging the mains plug from the  
 

mains socket outlet

Pull the power cord by the plug - do not 
pull on the power cord.

Ensure that you always have easy access 
to the mains cord or the mains plug to 
disconnect the TV from the mains.

Ensure the power cord is fully inserted 
into the TV mains socket and the wall 
socket. 

If the TV is mounted on a swivel base 
or swivel arm, ensure no strain is placed 
on the power cord when the TV is 
swivelled. Strain on the power cord can 
loosen connections and cause arcing or 
fire.

Verify that the mains supply voltage in 
your home corresponds to the voltage 
printed on the sticker at the rear of the 
TV. 

9.

10.

11.

12.

13.

14.

15.