U-Line 2015WC Benutzerhandbuch

Seite von 16
02/2005
3
www.U-LineService.com
2015WC/2015WCOL Wine Captain
®
General Precautions
Use this appliance for its intended purpose only and 
follow these general precautions along with those listed 
throughout this guide:
WARNING
SHOCK HAZARD — Electrical Grounding Required. 
• Keep the unit unplugged throughout installation 
except during testing.
• Never remove the round grounding prong from 
the plug and never use a two-prong grounding 
adapter.
• Never use an extension cord to connect power to 
the unit.
• Always keep your working area dry. 
CAUTION
• Use care when moving and handling the unit. Use 
gloves to prevent personal injury from sharp edges.
• Do not lift the unit by the door or door handle.
• Do not install the unit behind closed doors or in any 
way that would obstruct airflow to the front grille, 
which may cause the unit to malfunction.
You have received a carton containing your 2015WC or 
2015WCOL Wine Captain
®
 with a package inside 
containing a User Manual, a Product Registration Card 
and an Anti-Tip Bracket Installation Kit. 2015WCOL units 
are shipped with a cardboard-wrapped door and an 
additional package of hardware. Complete and mail 
the Product Registration Card or register online at 
www.U-LineService.com. Once your unit is installed, keep 
the User Manual and this Installation Guide in a safe place 
for future reference.
2015WC units are Black, White or Stainless Steel. Black 
and White units have a reversible door with a slightly 
contoured handle across the top. Stainless Steel units are 
covered with a protective coating and have been ordered 
left- or right-hand hinged. The Stainless doors are not 
reversible. 
2015WCOL units are Black with an unattached door that 
requires the construction of a 3/4-inch thick wood overlay 
frame. You must determine left- or right-hand opening 
before construction.
All units come with maple trim wine racks that can be 
finished or stained. Please carefully follow the directions 
that apply to your unit and your intended design.
Tools/Materials Required
• 7/64" Allen wrench (included in 2015WCOL hardware)
• Screwdrivers — slotted and Phillips head
• Sandpaper; low odor, water clean up, quick drying 
finish; tack cloth and, if desired, water-based wood 
stain and synthetic foam brush
• 3/4-inch overlay frame material, cutting tools, drill and 
bits (2015WCOL units)
Inspection
Unwrap and inspect the unit on a flat, level surface 
capable of supporting its entire weight.
Removing Protective Coating
(Stainless Steel Units Only)
When inspecting/installing a Stainless Steel unit, the 
protective coating covering the unit must be removed 
first. Start at a corner of the unit/door and pull back the 
protective coating to remove it from the unit/door.
2 Inspect and Plan