Frigidaire FPGF3685LS Benutzerhandbuch

Seite von 28
10
SETTING SURFACE CONTROLS
Placement of Burner Grates
Place grate over burner pans. Make sure that the groove 
under grate fi ts over the raised lip of the burner pan. The 
rounded corners of the grates should be placed toward the 
front of the cooktop for the front burners and the rear of 
the cooktop for the back burners.
Placement of Burner Bases and Caps
Your Cooktop is equipped with three different sizes of burners: 
Power Burner, Standard Burner and Simmer Burner.
Place the burner base over each gas opening, matching 
the burner base size with the gas opening size. Place the 
burner cap on each burner base, again matching the cap 
size to the burner base size. The cap for each burner has 
an inner locating ring which locates the burner cap in the 
center of the burner.
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light. If the 
burner does not light, contact a Service Center. Do not 
service the sealed burner yourself.
Burner Cap
Gas 
Opening
Burner Pan
Burner 
Base
Electrode