Siemens FX300 Benutzerhandbuch
5
START-UP
38
SITRANS FX300
www.siemens.com/flow
06/2009 - SFIDK.PS.050.F2.02 A5E02100423
Start-up
5.1 Start
After the device is switched on, the display shows the following in sequence
1. Testing...
2. Device type
2. Device type
Sofware Version - Revision
The device performs a self-test and switches to measurement mode. Here, all of the parameters
preset for the customer are analysed and checked for plausibility, and the current measured
value is displayed.
preset for the customer are analysed and checked for plausibility, and the current measured
value is displayed.
5.2 Start-up and control
INFORMATION!
The flowmeter is largely maintenance-free.
Observe the application limits in respect of temperature and medium. Additional information
refer to Technical data on page 67
The flowmeter is largely maintenance-free.
Observe the application limits in respect of temperature and medium. Additional information
refer to Technical data on page 67
.
MA_Siemens_Sitrans_FX300_R02_en_PRT.book Page 38 Monday, June 22, 2009 8:17 AM