3M eg3 Benutzerhandbuch
Docking station functionality
Charging your dosimeter
053-644, Rev E
Page 14
eg4 & eg3
14
The number of hours you have used your dosimeter from your last charge will
impact your total
charge time. For example, if the battery clock indicator (see “Checking the battery power” for
more information) displays 20 hours remaining on the battery and you wish to charge the battery,
more information) displays 20 hours remaining on the battery and you wish to charge the battery,
the approximate charging time is 2 hours.
To charge a fully discharged battery, allow approximately 4 to 4.5 hours of charge time.
To charge a fully discharged battery, allow approximately 4 to 4.5 hours of charge time.
How to charge
1. Plug in the power adapter to the EdgeDock. (See Figure 2-6, page 13.)
When powered on, the EdgeDock bottom LED indicator will appear solid amber.
2. Slide the Edge (1) downward onto the Hook of the EdgeDock. (See Figure 2-7 below).
NOTE: When the dosimeter is docked, the top LED indicator on the base will be
illuminated. A red flashing LED indicates it is charging. A green solid LED indicates a
fully charged battery.
illuminated. A red flashing LED indicates it is charging. A green solid LED indicates a
fully charged battery.
Figure 2-7: Docking the Edge with a single and 5-bay docks
Open cavity & contacts
Slides into
“Hook” of
EdgeDock. The
contacts will align to
each other.
contacts will align to
each other.
Docking station LED
Hook
Contacts
Backside of Edge
EdgeDock1
Dosimeter LED dock
1
2
3
Docked
Docked