Standard Horizon MDS-1 Benutzerhandbuch
Radar Installation Manual
Page 15
Standard Horizon Chart Plotter. Do not omit the in-line fuse unless a dedicated and fused
terminal is available. If so, install a 5 Amp fuse.
Terminal Strip C - Radar Cable
This terminal strip is used to connect the Radar Antenna.
terminal is available. If so, install a 5 Amp fuse.
Terminal Strip C - Radar Cable
This terminal strip is used to connect the Radar Antenna.
2.6
RADAR ANTENNA CONNECTIONS
2.6.0 DOME Connections
Radar Switch
RADAR CABLE
WIRE COLOR FUNCTION
BLACK
BLACK
DATA GROUND
ORANGE
DATA OUT+
YELLOW
DATA OUT-
BROWN
DATA IN+
RED
DATA IN-
GREEN
POWER ON/OFF SWITCH
BLUE
POWER ON/OFF SWITCH
BLACK
RADAR BATTERY GROUND
WHITE
RADAR BATTERY POSITIVE
Figure 2.6.0 - DOME Connections
2.6.1 OPEN ARRAY Connections
Radar Switch
RADAR CABLE
WIRE COLOR FUNCTION
BLACK
BLACK
DATA GROUND
ORANGE
DATA OUT+
YELLOW
DATA OUT-
BROWN
DATA IN+
RED
DATA IN-
GREEN
POWER ON/OFF SWITCH
BLUE
POWER ON/OFF SWITCH
BLACK
RADAR BATTERY GROUND
WHITE
RADAR BATTERY POSITIVE
BLUE
MOTOR SUPPLY-
RED
MOTOR SUPPLY+
Figure 2.6.1 - OPEN ARRAY Connections
NOTE
When installing a Open Array Radar, it is important to connect:
a. Red (motor+) and White to B+ connection
b. Blue (motor -) and Black to B- connection.