Aussie 6122S8X641 Benutzerhandbuch

11

To reduce the risk of a laceration hazard, wear protective gloves when handling parts that have sharp edges.

Attach the Heat Shield and the Front Side Table Support to the top of the Front U-Leg with 2) 1/4-20 x 1.5” Bolts. Insert 
the bolts through the Heat Shield then the U-Leg then into the threaded inserts in the Front Side Table Support.

Front            
Side Table    
Support

Heat Shield 
(under leg)

1/4-20 x 1.50” Bolt 

2 pcs

M4 x .31” Bolt

4 pcs

NOTE: Regulator hose is shipped attached to the Manifold. 

Insert valve stems out through front of the Control Panel so that the holes in the valve brackets align with the holes 

in the Control Panel. Fasten in place with 4) M4 x .31” Bolts through the Control Panel into the valve brackets. The 
Regulator hose will be on the LEFT side.

Install the Piezo Igniter by first, removing the large nut shipped threaded in place on the igniter, then inserting the 

igniter through the large hole on the left side of the Control Panel and fastening in place with the large nut previously 
removed. 

Piezo Igniter 

Large Nut

Model 6122 with 
side burner valve

Model 6112 without 
side burner valve