Aussie 6122S8X641 Benutzerhandbuch
18
Step 19
A. Main Burner Electrode Assembly
Insert small end of Electrode Wire down through the hole in the Bowl in front of the main burner until flange of collec-
tor box rests on front edge of burner. Fasten Electrode collector box to the burner with 1) #5 x .31” Tapping screw.
tor box rests on front edge of burner. Fasten Electrode collector box to the burner with 1) #5 x .31” Tapping screw.
A
B
#5 x .31” Tapping Screw
1 pc.
Front of Grill
B. Electrode Wire Plug Assembly
Route electrode wire away from the burner and bowl then plug end onto the tip of the Piezo Igniter mounted in the
control panel.
control panel.