Linear SLC Benutzerhandbuch

SLR • SLC • SLD  Slide Gate Operator Installation Guide 

- 34 -

 

227968 Revision X13 2-3-09

Gate Operator Installation Checklist

 

❑

 

❑

 

1 .  The gate has been checked to make sure it is level and moves freely in both directions .

 

❑

 

❑

 

2 .  Potential pinch areas have been guarded so as to be inaccessible 

OR have 

contact and/or non-contact obstruction sensing devices installed .

 

❑

 

❑

 

3 .  The installer has installed one or more contact or non-contact obstruction sensing 

devices, in compliance with UL325 requirements for this installation .

 

❑

 

❑

 

4 .  If pedestrian traffic is expected, a separate pedestrian gate has been 

installed, a minimum of seven feet from the gate . The customer has been 
informed that all pedestrian traffic must use the pedestrian gate .

 

❑

 

❑

 

5 .  Warning signs have been installed on each side of the gate in highly visible locations . 

The customer has been informed that these signs must remain at all times .

 

❑

 

❑

 

6 .  There are no controls installed on the gate operator, or within seven feet of the gate .

 

❑

 

❑

 

7 .  The installer has properly adjusted the obstruction sensing feature and has tested 

the gate to make sure that the gate stops and reverses a short distance with minimal 
resistance applied (40 lbs . on a swing gate at the end of the gate, 75 lbs . on a slide gate) 

 

❑

 

❑

 

8 .  The installer has instructed the customer in the proper use of the gate operator and reviewed 

all of the operational functions, obstruction sensing devices, warning beeper and reset, etc .

 

❑

 

❑

 

9 .  The installer has instructed the customer in the proper use of the operator’s 

manual disconnect feature . The manual disconnect must never be used 
while the gate is in motion . The power switch must be turned off before 
using the manual disconnect and disengaging the operator .

 

❑

 

❑

 

10 .  The installer has reviewed all safety instructions with the customer, and has left 

the safety instructions and owner’s information sheets for their reference .

 

❑

 

❑

 

11 .  The installer has answered any questions the customer has regarding the 

operation of the gate operator and gate operator safety precautions .

 

❑

 

❑

 

12 .  The installer has explained to the customer that a regular maintenance 

schedule for both the gate and the gate operator is recommended .

By signing this installation checklist, I/we hereby certify that each item listed and checked above has been covered by the 
installer and is clearly understood by the customer .

Customer’s Signature

Installer’s Signature

Date

Date