Daewoo KOC-1B0K0S Benutzerhandbuch

17

The door lock mechanism is a device which has been specially designed to completely eliminate
microwave radiation when the door is opened during operation, and thus to perfectly prevent the danger
resulting from the leakage of microwave.

When the door is closed, the hook
locks the oven door. If the door is
not closed properly, the oven will
not operate. When the door is
losed, the hook pushes the lock
lever downward. The lock lever
presses the button of the
microswitch. Then the button of the
primary interlock switch bring it
under “ON” condition.

When the door is closed, the hook
pushes the lock lever downward.
The lock lever presses the button
of the interlock monitor switch to
bring it under “OFF” condition and
presses the button of the
secondary interlock switch to bring
it under “ON” condition.

- Adjustment

 When the door is closed, the interlock monitor switch should be opened before other switches
 are closed.
 When the door is opened, the interlock monitor switch should be closed after other switches
 are opened.

 (a) Loosen the one mounting screws.
 (b) Adjust interlock switch assembly position.
 (c) Make sure that lock lever moves smoothly after adjustment is completed.
 (d) Tighten completely one mounting screws.

 NOTE : Microwave emission test should be performed after adjusting interlock mechanism.
  If the microwave emission exceed 4mW/cm

2

, readjust interlock mechanism.