Philips Vacuum cleaner with bag FC9178/03 FC9178/03 Benutzerhandbuch

Produktcode
FC9178/03
Seite von 298
tri-active nozzle (specific types only)
The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard floors.
 - The side brushes catch more dust and dirt at the sides of the nozzle 
and allow you to clean better along furniture and other obstacles.
 - The opening at the front of the nozzle allows you to suck up larger 
particles.
 1 
 Use the hard floor setting to clean hard floors (for instance for 
tiled, parqueted, laminated and linoleumed flooring): push the rocker 
switch on top of the nozzle with your foot to make the brush strip 
come out of the housing. At the same time, the wheel is lifted to 
prevent scratching and to increase manoeuvrability.
 2 
 Use the carpet setting to clean carpets: push the rocker switch again 
to make the brush strip disappear into the nozzle housing. The wheel 
is lowered automatically.
remote control operation (specific types only)
 - The remote control has three buttons with which you operate the 
vacuum cleaner. With the ‘+’ and ‘-’ buttons you adjust the suction 
power and with the standby button you switch the appliance to 
standby mode.
Note: The functions on the remote control only work after you have switched 
on the appliance with the on/off switch on the appliance itself. 
Note: Replace the batteries when the ‘infrared active light’ does not light up 
when you press any button. See chapter ‘Replacement’ to replace the batteries.
English
12