Sony 32" BRAVIA™ S-Series LCD HDTVKDL-32S2000 KDL-32S2000E Handbuch

To display clear crisp pictures, you must connect your TV correctly and 
select the correct Wide Mode to display the picture in the correct aspect 
ratio (see “Changing the Wide Screen Mode” on page 20). It is strongly 
recommended to connect the antenna/cable input using the supplied 75-ohm 
coaxial cable to receive optimum picture quality signal. A 300-ohm twin 
lead cable can be easily affected by radio noise and the like, resulting in 
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far 
away from the TV as possible.
You can also connect a variety of optional equipment to your TV (see page 
13). For multiple equipment connections, please refer to the Quick Setup 
Guide.

From the

 Setup

 settings, select 

Cable On

 or 

Cable Off

 for your type of input signal.

Use this hookup if
s

You subscribe to a cable TV system that uses scrambled or encoded 
signals requiring a cable box to view all channels, and

s

You do not intend to hook up any other audio or video equipment to 
your TV.

Also, set 

Cable

 to 

On

 in the 

Setup

 settings (see page 31).

75-ohm coaxial 

cable (supplied)

Rear of TV

VHF/UHF input

z

To change channels using 
the cable box, set your TV 
to channel 3 or 4 
depending on the cable 
box channel output.
Auto Scan will fix the 
channel automatically.

75-ohm coaxial 

cable (supplied)

Cable

IN 

jack

OUT 

jack

Rear of TV 

VHF/UHF input