Epson LQ-2170 Benutzerhandbuch

Connecting the Printer to Your Computer

If the self test printed correctly, you are ready to connect your
printer to the computer. Use a 36-pin cable to connect your

computer to your printer’s built-in parallel interface. Follow these

steps:

1. Make sure both the printer and computer are turned off; then

plug the cable connector securely into the printer’s parallel
interface connector. Squeeze the wire clips together until they

lock in place on either side of the connector.

Note:

your cable has a ground wire, connect it to the ground connector

beneath

the

interface connector.

2. Plug the other end of the cable into the computer. (If there is a

ground wire at the computer end of the cable, attach it to the
ground connector at the back of the computer.)

1-14 Setting Up the Printer