Hoshizaki fh1-ssb Zusätzliches Handbuch

36

For RH1-SSB(-HD) aux. code M5_____B and earlier, RH1-SSB-GD aux. code L0 
and earlier, and refrigerator side of RFH-SSB(-HD) aux. code M5 and earlier, there 
was a non-interchangeable part change. If your unit falls into this time frame and you 
need to replace parts in the evaporator fan shroud assembly, review the scenarios 
below and follow the appropriate solution.

a. Unit's evaporator shroud has only two holes or has four holes but only the lower 

two holes are threaded.

Solution: Order HS-3541 that contains a motor (Shinko), brackets, blade, and 

all fasteners required for mounting to the shroud using the existing 
threaded holes. For details, see the unit's parts list.

b. Unit's evaporator shroud has four threaded holes and a Jakel motor.

Solution: Order a new motor (Shinko), brackets, fan blade, and the appropriate 

fasteners listed in the unit's parts list. Attach the brackets to the upper 
two holes on the shroud.

For FH1-SSB(-HD) and freezer side of RFH-SSB(-HD) and RFH3-SSB(-HD) aux. 
code M5 and earlier, there was a non-interchangeable part change. If your unit falls 
into this time frame and you need to replace parts in the evaporator fan shroud 
assembly, order HS-3545 and replace the entire assembly.