Toshiba M100 Betriebsanweisung

59

5.375 x 8.375 ver 2.3

You can now continue setting up the computer. When the 
operating system has loaded, you can verify that the 
computer has recognized the additional memory module.

If you are adding an extra memory module after setting up the 
computer, verify that the computer has recognized it correctly 
as described in 

If you need to remove a memory module:

Complete steps 

–

 to shut down the computer and open the memory 

module slot cover.

Do not try to remove a memory module with the computer 
turned on. You can damage the computer and the memory 
module.

Do not remove the memory module while the computer 
is in Standby or Hibernation mode. The computer could 
hang up the next time you turn it on and data in memory 
will be lost. In either of the above cases, the Standby 
configuration will not be saved.

The following message appears when you turn on the 
power:

Warning: Resume Failure
Press Any Key To Continue

If the computer hangs up when you turn it on, perform the 
following: Press the power button and hold it down for at least 
ten seconds, then turn the power on again.