Sony str-da4600es Betriebsanweisung

x OFF

Does not activate the low-pass filter.

x ON

Always activates the low-pass filter with a 
cutoff frequency of 120 Hz.

Lets you output the video input signals from 
the HDMI IN jack directly to the HDMI OUT 
jack.

x OFF

The input signals from the HDMI IN jack are 
output through a video processor.

x ON

The input signals from the HDMI IN jack are 
output directly.

Set “Video Direct” to “ON” to receive Adobe

RGB

 or 

Adobe

YCC601

 signals.

Makes the settings for the network.

Lets you make the network settings.

Select “Network Setup,” then press 

.

Select “Network Information,” then 
press .
The network setting information of the 
receiver is displayed on the TV screen.

Select “Network Setup,” then press 

.

Select “Internet Setup,” then press 

.

Select “Connect Automatically 
(DHCP),” then press 

.

“Success! The receiver is now connected to 
network.” appears on the TV screen. 

Press 

 to select “Finish.”

Select “Network Setup,” then press 

.

Select “Internet Setup,” then press 

.

Select “Manual Configuration,” then 
press .
The setting screen for the IP address 
appears on the TV screen.

Select the IP address, then press 

.

The soft keyboard appears on the TV 
screen.