Sony HT-DDW650 Betriebsanweisung
38
US
HT-DDW650 4-244-183-71(1) US
Remote
Operations
Function
Button
O
DVD PLAYER/ Returns to the previous
VIDEO
VIDEO
menu or exits the menu.
CASSETTE
RECORDER
(DVD mode)
RECORDER
(DVD mode)
V/v/B/b
Satellite tuner/ Selects a menu item.
DVD PLAYER/
VIDEO
CASSETTE
RECORDER
DVD PLAYER/
VIDEO
CASSETTE
RECORDER
ENTER/
Satellite tuner/ Press to enter the
EXECUTE
DVD PLAYER/ selection.
VIDEO
CASSETTE
RECORDER
VIDEO
CASSETTE
RECORDER
TV ?/1
TV
Turns the TV on or off.
TV VOL
TV
Adjust the volume of
+/–
the TV.
TV CH +/–
TV
Select preset TV
channels.
channels.
TV/
TV
Selects input signal: TV
VIDEO
input or video input.
WIDE
TV
Selects the wide picture
mode.
mode.
Notes
• Some functions explained in this section may not
work depending on the model of the receiver.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
component the above operation may not be possible
or may operate differently than described.
• Press MAIN MENU on the remote before you use
the V/v/B/b buttons for receiver operation.
• Press TOP MENU/GUIDE or MENU/AV MENU
on the remote before you use the remote to control
the satellite tuner and DVD PLAYER/VIDEO
CASSETTE RECORDER.
the satellite tuner and DVD PLAYER/VIDEO
CASSETTE RECORDER.
• The >10/11 and 12 functions are not avaiable for set
operation.
Changing the factory
setting of an input
selector button
setting of an input
selector button
If the factory settings of the input selector
buttons do not match your system components,
you can change them. For example, if you have
a tape deck and you do not have an MD deck,
you can assign the MD/TAPE button to your
tape deck.
Note that the settings of the DVD and VIDEO1
button cannot be changed.
buttons do not match your system components,
you can change them. For example, if you have
a tape deck and you do not have an MD deck,
you can assign the MD/TAPE button to your
tape deck.
Note that the settings of the DVD and VIDEO1
button cannot be changed.
1
Hold down the input selector button
whose input source you want to change
(for example, MD/TAPE).
whose input source you want to change
(for example, MD/TAPE).
2
Press the corresponding numeric
codes of the component you want to
assign to the input selector button (for
example, 25 – Tape deck B).
codes of the component you want to
assign to the input selector button (for
example, 25 – Tape deck B).
The following numeric codes are assigned
to select the input source:
to select the input source:
To operate
Code(s)
CD player
22
MD deck
23
Tape deck A
24
Tape deck B
25
VCR (command mode VTR 2*)
26
VCR (command mode VTR 3*)
27
TV (SONY)
01
DSS (Digital Satellite Receiver)
30
DVD
21
Tuner
28 or 29
* Sony VCRs are operated with a VTR 2 or 3
setting. These correspond to 8mm and VHS
respectively.
respectively.
Now you can use the MD/TAPE button to
control the Tape Deck B.
control the Tape Deck B.
Remote Button Description
(continued)
(continued)