Sony dvp-c660 Handbuch

56

x

The player can store the SUBTITLE, VES, and other
settings of each disc for up to 200 discs (Playback
Memory).
Set the Playback Memory function on or off.
• ON : stores the settings in memory when you eject the

disc.

• OFF : does not store the settings in memory.

The following settings are stored in memory by the
Playback Memory function.

– AUDIO (page 34)
– SUBTITLE (page 36)
– ANGLE (page 36)
– VES (page 37)

• The player can store the settings of up to 300 discs.  When you

store the setting of disc number 301, the first disc setting is
canceled.

• Depending on the DVD, the information stored in the disc

takes priority over the Playback Memory settings and the
function does not work.

• Do not turn off the player by pressing !. Doing so may cancel

the settings. When you turn off the player, press x first to stop
playback and then press ?/1 on the remote. After the power
indicator lights up in red and the player enters standby mode,
press ! on the player.

x

Gives the sound track which contains the highest number
of channels priority when you play a DVD on which
multiple audio formats (PCM, DTS or Dolby Digital
format) are recorded.
• OFF : No priority given.
• AUTO : Priority given.

• When you set this item to “AUTO,” the language may change

depending on the “AUDIO” settings in “LANGUAGE SETUP.”
The “TRACK SELECTION“ setting has higher priority than the
“AUDIO” settings in “LANGUAGE SETUP” (page 51).

• If you set “DTS” in “AUDIO SETUP” to “OFF,” the DTS sound

track is not played even if you set this item to “AUTO” and the
highest-numbered audio channel is recorded in DTS format.

• If PCM, DTS and Dolby Digital sound tracks have the same

number of channels, the player selects PCM, DTS and Dolby
Digital sound tracks in this order.

• Depending on the DVD, the audio channel with priority may

be predetermined.  In this case, you cannot give priority to the
DTS or Dolby Digital format by selecting  “AUTO.”

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:

To set, press                , then            .
To quit, press               .

OFF

STANDARD

DOLBY SURROUND

ON

ENTER

DOLBY DIGITAL:

D-PCM

DTS:

OFF

DISPLAY

“AUDIO SETUP” allows you to set the sound according
to the playback conditions.
The default settings are underlined.

Select “AUDIO SETUP” in the setup display.

x

If the playback sound is distorted, set this item to “ON.”
The player reduces the audio output level.
Selects the setting of the output from the AUDIO OUT (1,
2) connectors according to the audio equipment to be
connected.
• OFF: turns off the audio attenuation. Normally select

this position.

• ON: reduces the audio output level so that no sound

distortion occurs. Select this when the playback sound
from the built-in TV speakers is distorted.

The setting does not affect the output from the DIGITAL OUT
OPTICAL and COAXIAL connectors.

x

only)
Makes the sound clear when the volume is turned down
when playing a DVD.  This function works only when
you play a DVD which has the AUDIO DRC function.
This affects the output from the DIGITAL OUT connectors
only when “DOLBY DIGITAL” is set to “D-PCM” in
”DIGITAL OUT,” and it affects the output from the
AUDIO OUT (1, 2) connectors.
• STANDARD: Normally select this position.
• TV MODE: makes the low sounds clear even if you turn

the volume down.  It is especially recommended when
you listen to the sound using the speakers of the TV.

• WIDE RANGE: It gives you the feeling of being at a live

performance.  This function works only when you are
playing a Dolby Digital disc.  When you use high
quality speakers, it is more effective.

When you play DVDs without the AUDIO DRC function, there
may be no effect on the sound.