Sony dvp-ns76h Betriebsanweisung

◆ DivX

Displays the registration code for this player. 
For more information, go to 
http://www.divx.com 
on the Internet.

◆ AUDIO (HDMI)

Selects the type of audio signal output from 
the HDMI OUT jack.

A loud noise (or no sound) will be output if you 
connect the player to a TV that is not compatible 
with DOLBY DIGITAL/DTS signals and “AUTO” 
is selected. In this case, select “PCM.”

“AUDIO SETUP” allows you to set the sound 
according to the playback and connection 
conditions.

Select “AUDIO SETUP” in the Setup 
Display. To use the display, see “Using the 
Setup Display” (page 64).
The default settings are underlined.

◆ AUDIO ATT (attenuation)

If the playback sound is distorted, set this 
item to “ON.” The player reduces the audio 
output level.
This function affects the output of the 
following jacks:
– LINE OUT L/R (AUDIO) jacks
– LINE (RGB)-TV jack

◆ AUDIO DRC (Dynamic Range Control) 
(DVD VIDEO/DVD-VR mode only)

Makes the sound clear when the volume is 
turned down when playing a DVD that 
conforms to “AUDIO DRC.” 
This function affects the output from the 
following jacks:
– LINE OUT L/R (AUDIO) jacks
– LINE (RGB)-TV jack
– DIGITAL OUT (OPTICAL or COAXIAL)/

HDMI  OUT jack only when “DOLBY 
DIGITAL” is set to “D-PCM” (page 70).

AUTO

Normally, select this. Outputs 
audio signals according to the 
“DIGITAL OUT” settings 
(page 70).

PCM

Converts Dolby Digital, or 96 
kHz/24 bit PCM signals to 48 
kHz/16 bit PCM.

OFF

Normally, select this position.

ON

Select this when the playback sound 
from the speakers is distorted.

STANDARD

Normally select this position.

TV MODE

Makes low sounds clear even if 
you turn the volume down.

WIDE 
RANGE

Gives you the feeling of being 
at a live performance.

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

AUDIO FILTER:

SHARP

DOLBY DIGITAL:
MPEG:

D-PCM

PCM

DTS:

OFF

48kHz/96kHz PCM:

48kHz/16bit

,