ASKProxima impression 8300 Betriebsanweisung

USER GUIDE

SVGA DLP PROJECTOR

22

ZOOM is used  to obtain the desired screen size of the image at a given
projection distance.

FOCUS is adjusted until the image (pixels) becomes sharp on the screen.

TUNE is used to stabilize the image. An untuned image can be seen as
sideways instability or “swimming”. The TUNE function has no effect in
VIDEO mode.

FREQUENCY is provided in order to image width. Generally, an incorrect
frequency setting can be observed as an image too wide or too narrow,
combined with vertical, unstable bands.

POSITION. Due to minor variations in graphic cards, the horizontal and
vertical position may need adjustment. Select POSITION, then press LEFT
and use the cursor keys.

REAR inverts the image for use in rear projection arrangements i.e.
projection from the back of a screen.

CEILING switches between an upright and an upside-down projection by
flipping the image vertically.

FACTORY RESET. This function resumes factory settings of all
parameters.

TINT controls the hue of an image, and is only active in NTSC-video.

SHARPNESS controls the sharpness of the lines in an image, and is only
active for video sources.

COLOR adjusts color saturation. Only applicable when video is connected.

GAMMA toggles the gamma correction on and off for video sources. Only
active for video sources.