ASKProxima impact wsx Betriebsanweisung

USER GUIDE

LCD PANEL

9

Connect the mouse to the LCD panel using the appropriate adapter (6) as
described in the table below. Then connect the adapter (6) to the mouse
cable at the computer end. Finally, connect the mouse cable to the LCD
panel (2).

For the computer to recognise the mouse, connect the mouse before
power is applied.

A Y-split is provided with the PC and MAC adapters that enables parallel
use of the local computer mouse and the remote mouse. The local and
remote mice should however not be operated simultaneously, as this may
lead to unpredictable positioning of the mouse pointer.
If you have a Macintosh, make sure to connect your Mac mouse adapter
via the keyboard.

The PS/2 adapter does not have a Y-split.

To use the mouse function with workstations requires workstation
compatibility with one of the mice defined below.

Microsoft 2 key compatible (9 pin serial port)

PC

PS/2 compatible mouse

PS/2 (option)

Macintosh ADB-bus mouse

MAC (option)

1

Control mouse pointer directly with the cursor keys

2

Press LEFT to activate (emulates the left mouse key)

3

Press DRAG to tag an object, move it using the cursor keys,
then press DRAG again (or wait 5 seconds) to release the
object.

4

Press RIGHT if your application requires emulation of the
right mouse key.

The centre key of three-key mice is not emulated.

If double-click does not work properly, try to adjust the double-click rate
within the computer application in use.