Sony hcd-dz100 Handbuch

To obtain the best possible surround sound, set 
for the size of the speakers you have connected 
and their distance from your listening position. 
Then use the test tone to adjust the level and the 
balance of the speakers to the same level.

Select [SPEAKER SETUP] in the Setup 
Display. For details, see “Using the Setup 
Display” (page 66).
The default settings are underlined.

Select the item, then press CLEAR. Note that 
only the [SIZE] setting does not return to the 
default setting.

x [SIZE]

If you do not connect center or surround 
speakers, or move the surround speakers, set the 
parameters for [CENTER] and [SURROUND] 
and specify the surround speaker position. Since 
the front speaker setting is fixed, you cannot 
change them.

• When you select an item, the sound cuts off for a 

moment.

• Depending on the settings of other speakers, 

subwoofer may be excessive.

x [DISTANCE]

The default distance setting for the speakers in 
relation to the listening position is shown below.
When you set the distance using the Quick Setup 
(page 26), the settings is automatically 
displayed.

Be sure to change the value in the Setup Display 
when you move the speakers.

SPEAKER SETUP

DISTANCE:
LEVEL(FRONT):
LEVEL(SURROUND): 

OFF

TEST TONE:

FRONT:
CENTER:

YES

BEHIND

YES

YES

SURROUND:
SUBWOOFER:

SIZE:

A

A

B

B

Position diagram

[YES]

[YES]: Normally select this.

[NONE]: Select this if no center 
speaker is used. 

[BEHIND]: Select this if surround 
speakers are located in section B.

[SIDE]: Select this if surround 
speakers are located in section A.

[NONE]: Select this if no 
surround speaker is used.

[YES]

Front speaker distance from the 
listening position can be set in 0.2 
meter (1 ft) increments from 1.0 to 
7.0 meters (4 to 23 ft).