Sony ht-ddw795 Handbuch

Clearing the receiver’s memory may remedy 
the problem (page 20). However, note that all 
memorized settings will be reset to their 
factory settings and you will have to readjust 
all settings on the receiver.

Consult your nearest Sony dealer. Note that if 
service personnel changes some parts during 
repair, these parts may be retained.

POWER OUTPUT AND TOTAL 
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 
120 – 20,000 Hz; rated 85 watts per channel 
minimum RMS power, with no more than 1% 
total harmonic distortion from 250 milliwatts 
to rated output.

Power Output

1)

Stereo mode (rated) (6 ohms 1 kHz, THD 1%)

85 W + 85 W

Surround mode

2)

 (reference) 

(6 ohms 1 kHz, THD 10%)

RMS output
FRONT:133 W 
per channel
CENTER: 133 W
SURROUND: 133 W
per channel

Surround mode

2)

 (reference) 

(6 ohms 100 Hz, THD 10%)

SUB WOOFER: 135 W

1)

Measured under the following conditions:

120 V AC, 60 Hz

2)

Reference power output for front, center and 
surround speakers and sub woofer. Depending on 
the sound field settings and the source, there may 
be no sound output.

Inputs

Analog

Sensitivity: 800 mV/
50 kohms

Digital (Coaxial) Impedance: 75 ohms

Tone

Gain levels

±6 dB, 1 dB step

Reproduction frequency range:

28 – 20,000 Hz

All memorized settings

Customized sound fields