Compuprint 3056 Installationsanweisungen

 
 

 

 

 

1-  Make sure the following parts are included while unpacking the printer, and no parts are 
damaged. 
2-  Preserve the packing material properly for use in case of future printer transportation. 

 
 

13

12

11

14

10

9

8

1

2

7

3

4

5

6

 

 

Figure 1 

Remove the protection material before assembling printer: Refer to figure 1, and remove the 
protection material pointed out by numbers 1 to 7 on the printer outside and 8 to 14 inside the 
printer, and preserve them for the future transportation. 
After removing the protection material, take out the front paper chute board from the package, 
and push both hooks gently along the track into both gap locations of printer. You should hear 
a “click” when the hook snaps into the gap. 
 

 

 

1.  Make sure the printer is turned off before inserting the ribbon cartridge. 

2.  Remove the transparent cover part first, then hold the plastic hooks on both sides of the 

sheet holder and pull upwards to remove the transparent sheet holder. After that, move 
the print head to the middle of the printer.