Eagle expedition Betriebsanweisung
24
DISTANCE BETWEEN WAYPOINTS
The Eagle Expedition can easily give you the dis-
tance between two user waypoints. To do this, first
press the WPT key, highlight the “Options” menu
and press the right arrow key, then highlight the
“Dist Btwn WPTS” label and press the right arrow
key. The screen at right appears.
The Eagle Expedition can easily give you the dis-
tance between two user waypoints. To do this, first
press the WPT key, highlight the “Options” menu
and press the right arrow key, then highlight the
“Dist Btwn WPTS” label and press the right arrow
key. The screen at right appears.
The black box is resting on the “WPT B” label.
Now press the down arrow key to highlight the
waypoint number label. Press the left or right
arrow keys until the desired waypoint appears in
the “WPT B” box.
Now press the down arrow key to highlight the
waypoint number label. Press the left or right
arrow keys until the desired waypoint appears in
the “WPT B” box.
Once you have the first waypoint showing on the screen, then you need to
choose the other waypoint that you’re going to measure. Move the black
box back to the “Select” label at the top of the screen, then press the left
arrow key to select “A”. Now choose the waypoint that you wish to mea-
sure. The distance and bearing from the first waypoint “A” to the second
waypoint “B” shows at the bottom of the screen. You can select more
waypoints to measure at this time or press the EXIT key to erase this
screen.
choose the other waypoint that you’re going to measure. Move the black
box back to the “Select” label at the top of the screen, then press the left
arrow key to select “A”. Now choose the waypoint that you wish to mea-
sure. The distance and bearing from the first waypoint “A” to the second
waypoint “B” shows at the bottom of the screen. You can select more
waypoints to measure at this time or press the EXIT key to erase this
screen.
WAYPOINT OPTIONS
You can customize the look of the waypoints on
the plotter, or even turn them off. To do this, first
press the MENU key, then highlight the “WPT/
Icon Opts” label. Press the right arrow key. The
screen shown at right appears.
You can customize the look of the waypoints on
the plotter, or even turn them off. To do this, first
press the MENU key, then highlight the “WPT/
Icon Opts” label. Press the right arrow key. The
screen shown at right appears.
To keep the waypoints from showing on the plot-
ter, simply press the right arrow key when the
“Waypoints” label is highlighted.
ter, simply press the right arrow key when the
“Waypoints” label is highlighted.
To change the method waypoints show on the
plotter, highlight the “SHOW WPT” label. The de-
fault is numbers. In other words, when the waypoint shows on the plotter,
it’s number appears in a box, showing both its identity and location. You
can change this from number to name, or simply an empty box (position)
showing no identifiable name or number by pressing the left or right arrow
keys until the desired method appears. Now press the EXIT key. This
erases the menu and returns to the plotter with your selection.
plotter, highlight the “SHOW WPT” label. The de-
fault is numbers. In other words, when the waypoint shows on the plotter,
it’s number appears in a box, showing both its identity and location. You
can change this from number to name, or simply an empty box (position)
showing no identifiable name or number by pressing the left or right arrow
keys until the desired method appears. Now press the EXIT key. This
erases the menu and returns to the plotter with your selection.