Hitachi BZ-1 Betriebsanweisung

47

SETUP menu

Using the ▲/▼ buttons changes the eco mode setting.

NORMAL 

 ECO

• When the ECO is selected, acoustic noise and screen brightness 
are reduced.
• When AUTO ECO MODE (

46) is set to ON, the projector will 

always be set to Eco mode at start-up regardless this setting.

Using the ▲/▼ buttons switches the mode for mirror status.

NORMAL 

 H:INVERT  V:INVERT  H&V:INVERT

     

If the Transition Detector is on and MIRROR status is changed, 
TRANSITION DETECTOR ON alarm (

77) will be displayed when 

projector is restarted after the AC power is turned off.

Using ▲/▼ buttons switches the standby mode setting between 
NORMAL and SAVING. 

NORMAL 

 SAVING

When SAVING is selected, the power consumption in the standby 
mode is lowered with some functional restriction as below:
• When SAVING is selected, the RS-232C communication control 
except to turn the projector on and the network function are disabled 
while the projector is in the standby mode. If the COMMUNICATION 
TYPE in the COMMUNICATION menu is set to NETWORK 
BRIDGE, all of the RS-232C commands are disabled (

64).

• When SAVING is selected,

 

STANDBY setting of AUDIO SOURCE 

(

48) is invalid, and no signal is output from AUDIO OUT port in 

the standby mode.
• When SAVING is selected, STANDBY setting of MONITOR OUT 
is invalid, and no signal is output from MONITOR OUT port in the 
standby mode.

While the image signal from the input port chosen in step (1) is 
projected, the image signal from the input port selected in step (2) is 
output to MONITOR OUT port.
(1) Choose a picture input port using ▲/▼ buttons.

Choose STANDBY to select the picture  
output in the standby mode. 

(2)  Select one of the COMPUTER IN ports  

using ◄/► buttons.

Select OFF to disable the MONITOR OUT  
port for the input port or standby mode  
chosen in the step (1).

• You cannot select COMPUTER IN1 in step (1) and COMPUTER IN2 
in step (2) and vice versa.