SATO MB410i Betriebsanweisung
Unit 4: Operation and Configuration
Page 4-8
PN 9001190C
MB400i/MB410i Operator Manual
N
OTES
:
•
IrDA utilizes 3-wire cooked method of transporting data.
•
IrDA communication is limited to a 5.9 to 7.9 inches (15 to 20 cm) range.
•
The usable range may vary depending on the usage environment, or the capabilities of other
IrDA devices. Communication is compromised by direct sunlight or ambient light. In such a
case, block the strong light from entering the IrDA filter, or reduce the distance between the
two IrDA ports.
IrDA devices. Communication is compromised by direct sunlight or ambient light. In such a
case, block the strong light from entering the IrDA filter, or reduce the distance between the
two IrDA ports.
PRINTING VIA THE USB INTERFACE
To print with an optional USB cable (mini B type) connected to a PC or a handheld terminal,
perform the following operations.
perform the following operations.
Figure 4-10, Inserting USB cable
1. Pry open the USB/DIP switch cover and set the DIP switch 1 and 2 to ON position and set the
DIP switch 3 and 4 to OFF position.
2. Insert the USB cable into the connector. Make sure the shape and orientation of the plug is
correctly aligned.
3. Connect the other end of the USB cable to the connector on the PC or the handheld terminal.
For the connector on the PC or the handheld terminal, see the manuals provided with that
equipment.
equipment.
USB cover
USB cable