IBM 560x Hardwarehandbuch
Beep Symptoms
No Beep Symptoms
Symptom / Error
FRU / Action in Sequence
Continuous beeps.
System board.
One beep and a blank,
unreadable, or flashing
LCD.
unreadable, or flashing
LCD.
1. Reseat the LCD
connector.
2. LCD assembly.
3. System board.
3. System board.
One beep, and the message
“Unable to access boot
source.”
“Unable to access boot
source.”
1. Boot device.
2. System board.
2. System board.
One long and two short
beeps, and a blank or
unreadable LCD.
beeps, and a blank or
unreadable LCD.
1. System board.
2. LCD assembly.
2. LCD assembly.
One long beep followed by
four short beeps each time
the power switch is
operated.
(System cannot power on
due to low battery voltage.)
four short beeps each time
the power switch is
operated.
(System cannot power on
due to low battery voltage.)
Connect the AC Adapter
or install a fully charged
battery.
or install a fully charged
battery.
One beep every second.
(System is shutting down
due to low battery voltage.)
(System is shutting down
due to low battery voltage.)
Connect the AC Adapter
or install a fully charged
battery. (Allow the
system to completely shut
down before changing the
battery.)
or install a fully charged
battery. (Allow the
system to completely shut
down before changing the
battery.)
Two short beeps with error
codes.
codes.
POST error. See
“Numeric Error Codes” on
page 36.
“Numeric Error Codes” on
page 36.
Two short beeps with blank
screen.
screen.
System board.
Symptom / Error
FRU / Action in Sequence
No beep, power-on indicator
not on, and a blank LCD
during POST.
not on, and a blank LCD
during POST.
1. Go to “Power
Systems Checkout”
on page 30.
on page 30.
2. DC/DC card.
3. System board.
3. System board.
4. Check the power
outlet.
No beep, power-on indicator
on, and a blank LCD during
POST.
on, and a blank LCD during
POST.
DC/DC card.
System board.
No beep, power-on indicator
on, and a blinking cursor
only during POST.
on, and a blinking cursor
only during POST.
DC/DC card.
System board.
No beep during POST but
system runs correctly.
system runs correctly.
1. Turn the volume up
and check the
speaker.
speaker.
2. Speaker.
3. System board.
3. System board.
ThinkPad 560X (2640-60x, 70x)
41