Aten kh-0116 Benutzerhandbuch

KH0116 User Manual

18

If it becomes necessary to Power Off one of the KH0116 units, before starting 
it back up you must do the following:

1. Shut down all the computers that are attached to it.

Note: You must unplug the power cords of any computers that have the 

Keyboard Power On function. Otherwise, the switch will still 
receive power from the computers.

2. Wait 10 seconds, then Power the KH0116 back On.

3. After the KH0116 is up, Power On the computers.

Note: If you have shut down more than one Station, power up the highest 

Station (the one closest to the Master Station) first and work your way 
down to the lowest one.

Port Selection is accomplished either by means of the KH0116's On Screen 
Display (OSD), or by entering Hotkey combinations from the keyboard. OSD 
Operation is discussed in Chapter 3; Hotkey Port Selection is discussed in 
Chapter 4.

kh0116-v2.book  Page 18  Wednesday, March 22, 2006  4:53 PM