Aten kh-0116 Benutzerhandbuch

KH0116 User Manual

24

This function allows the Administrator and each User to set up his own 
working environment. A separate profile for each is stored by the OSD and is 
activated according to the Username that was provided during Login.

To change a setting:

1. Double Click it; or move the highlight bar to it, then press [Enter].

2. After you select an item, a submenu with further choices appears. To make 

a selection, either Double Click it; or move the Highlight Bar to it, then 
press [Enter]. An icon appears before the selected choice to indicate 
which one it is. The settings are explained in the following table:

OSD HOTKEY

Selects which Hotkey activates the OSD function:

[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].

Since the Ctrl key combination may conflict with programs running 
on the computers, the default is the Scroll Lock combination.

PORT ID 
DISPLAY 
POSITION

Allows you to position where the Port ID appears on the monitor. 
The default is the upper right corner, but you can have it appear 
anywhere on the screen.

Use the Mouse or the Arrow Keys plus Pg Up, Pg Dn, Home, End, 
and 5 (on the numeric keypad with Num Lock off), to position the 
Port ID display, then Double Click or press [Enter] to lock the 
position and return to the Set submenu.

PORT ID 
DISPLAY 
DURATION

Determines how long a Port ID displays on the monitor after a port 
change has taken place. The choices are:

User Defined - which lets you select the amount of time (from 1 - 
255 sec.); and

Always On - which displays the Port ID at all times.

If you select User Defined, key in the number of seconds, then 
press [Enter].

The default is 3 Seconds. A setting of 0 (zero) disables this 
function.

kh0116-v2.book  Page 24  Wednesday, March 22, 2006  4:53 PM